Seal of the College
From 1783 through 1929, the official seal of the College of William & Mary was the "temple" seal—sometimes referred to as the second seal—having replaced the original, colonial seal, which had been in use from 1697 but was changed following the American Revolution. The seal was a metal stamp or "matrix," used for authenticating documents by making an impression in melted wax. The design of the temple seal is sometimes credited to Thomas Jefferson, but is generally acknowledged to have been designed by George Wythe.
The temple seal was made in Philadelphia in 1782, cut by the engraver Robert Scot—formerly of Fredericksburg, Virginia—at a cost of £8/15s. It was ordered by the Reverend James Madison, president of the college, and forwarded to Williamsburg by his cousin, (later, President) James Madison, through Richmond, via Wythe.
Description of the seal
The new seal retained the college's motto in the border around the circumference, reading clockwise from the bottom, SIG. COLLEGII GULIELMI ET MARIÆ IN VIRGINIA: Seal of the College of William and Mary in Virginia. The center of the seal is filled by a squarish, two-story building of Greek Revival architecture, with three steps in the podium supporting four columns, and three urn-shaped finials (acroterions) decorating the front pediment. The two sets of windows are arched below and square above, with a single, circular window in the gable. An inscription on the frieze above the arched entrance reads, TEMP. MINERVÆ: the temple of Minerva, Roman goddess of wisdom. The steps are inscribed with (top to bottom), LOGIC, GEOM., and GRAM.: logic, geometry, and grammar. The four pillars read (from left to right): ARS MED., NAT. PH., MOR. PH., and JURISP., for: the medical arts, natural philosophy, moral philosophy, and jurisprudence. Above the building is a sun-disc with a human face, emanating rays of light. At the foot of the steps is a phoenix rising from a bed of flame.
Surviving examples of the temple seal can be found on several existing university documents from the time period, including a 1787 petition from the president and professors of the College to the Virginia Chief Justice, and an honorary Doctorate of Civil Law degree given to St. George Tucker in 1790.
Evidence for Wythe's design
The evidence for George Wythe's hand in designing the temple seal is detailed in Donald M. Sweig's article, "'Vert a Colledge...': A Study of the Coat-of-Arms and Seals of the College of William and Mary in Virginia" (1976). Sweig argues that Wythe had previously designed the Seal of the Commonwealth of Virginia in 1776, and that architecture-loving Jefferson would have found the design of the building crude, at best. The phoenix and classical references in the college seal are indicative of Wythe's influence and sensibilities.
Excerpt from "'Vert a Colledge....," April 1976
to all such matters, there can be no reason to doubt the fact." This point is substantiated by Wythe's own words. Writing to Jefferson on November 18, 1776, he notes, "I understand by the person employed to draw the figures for our great seal that you intended to propose an alteration in those on the reverse. I wish you would propose it; for though I had something to do in designing them, I do not like them."30 Therefore, both Jefferson's statement to Louis Hue Girardin and Wythe's own words support the position that he designed the Virginia state seal.
Interestingly, the reverse of the 1776 Virginia seal, which Wythe said he helped design, contains: "AETERNITAS, with the globe and phoenix."31 The phoenix is the most striking addition to the temple seal; and here it appears in another seal, with none other than Thomas Jefferson attributing the design to George Wythe. The case for Wythe as the designer of the 1782 William and Mary temple seal may be summarized briefly. Wythe was both willing and able to design seals; and a seal which he had designed contained an unusual device, the phoenix, which later appeared in the temple seal. Finally, there is no one else for whom so strong a case can be made as Wythe. This is not to say that he might not have consulted with others on the design; Jefferson and Wythe were friends, and it is entirely possible that Jefferson may have mentioned the idea of a temple for the William and Mary seal to Wythe.32 Certainly Madison, president of the college, would have been consulted. However, the actual execution of the temple in the design, the use of the phoenix, and the use of the inscriptions on the temple all indicate that the designer was George Wythe.
31 Italics added.
32 It is worth noting that Wythe's father-in-law, Richard Taliaferro, was among the foremost architects in Virginia. Taliaferro, who died in 1775, had designed the Wythe house in Williamsburg and had executed architectural designs for the Governor's Palace.
- History of Virginia
- Seal of the Commonwealth of Virginia
- Seal of the High Court of Chancery
- Seal of Virginia
- Seals of Virginia
- Wythe to Thomas Jefferson, 18 November 1776
- Donald M. Sweig, "'Vert a Colledge....': A Study of the Coat-of-Arms and Seals of the College of William and Mary in Virginia," Virginia Magazine of History and Biography, 84, no. 2 (April 1976), 142-165.
- William T. Hutchinson, et al., The Papers of James Madison VII (Chicago: University of Chicago Press, 1962), 153. Cited in Sweig, 147.
- Ibid. Cited in Sweig, 148.
- Petition of the President and Professors, Special Collections Research Center, Earl Gregg Swem Library, College of William and Mary; University Archives Diploma File Collection, Special Collections Research Center, Swem Library, College of William and Mary.
- "Coat of Arms," Special Collections Research Center Wiki, Earl Gregg Swem Library.
- "Receipt of Robert Scot, 16 June 1783," Founders Online, National Archives.
- "To James Madison from Joseph Jones, 25 May 1783," Founders Online, National Archives.
- "To James Madison from the Reverend James Madison, 4 June 1783," Founders Online, National Archives.